The sliding rigger concept is not new. The primary advantage
of this system is that it eliminates the effect of your torso weight shifting
back and forth as it does with a sliding seat. This is particularly noticeable
in shorter boats which will tend to "hobby-horse".
The geometry of the sculling stroke is the same whether you have
a sliding seat or a sliding rigger. One difference is the need to have a way to
capture your lower back/butt for this is the point that connects the locomotion
to the boat. We have a special padded seatplate for this function or the webbed
recumbent seat used on our adaptive gear. Our footstretchers are still
independently adjustable along the length of the 20" sliding carriage.
We first developed our sliding rigger in 1984. The first and
largest commercial builder to incorporate our gear was Dave Emmer and his
Skimmer catamaran. The international governing body of rowing (FISA) banned
sliding riggers about the same time because their inherent speed advantage
would immediately disenfranchise every rower that didn't have the system. It
remains an interesting option for a vast number of hulls.
One drawback of the sliding rigger was determining how to
install it as a canoe conversion. Because the sliding carriage must travel the
whole length of the rail it is necessary to support the monorail at each end.
Our Deck Plate and Stanchion kits are well suited for this in a number of
stitch and glue plywood boats. In a canoe, however, it is also necessary when
installing a rig to somehow compensate for the removal of the thwarts. The
rigger of the sliding seat Row Wing and the dual riggers of the Scout
Rig are securely attached to the gunwale of the canoe to act as replacement
thwarts. The development of the Scout Rig allowed us to design a similar
gunwale clamping system for a sliding rigger canoe mounting kit.